GROUNDING RODS
COPPER BONDED EARTH ROD AND ACCESSORIES
Externally Threaded

Protective earthing of commercial and industrial buildings by dispersing the lightning flashes and fault currents of distribution to the earth.

Mask Group 35.png
Group 36.png
  • For Copper plating thickness <254 microns. (30 microns, 100 microns, 120 microns) etc.

  • Add suffix “C” at end of part code.

Driving Stud

The driving stud is used as the impact bearing head when deep driving of earth electrode is required.

Mask Group 37.png
Coupler

Coupler is used to combine two or more earth rods.

Mask Group 38.png
Unthreaded Threaded

Protective earthing of commercial and industrial buildings by dispersing the lightning flashes and fault currents of distribution to the earth.

Mask Group 39.png
Mask Group 40.png
  • For Copper plating thickness <254 microns. (30 microns, 100 microns, 120 microns) etc.

  • Add suffix “C” at end of part code.

Driving Head

The driving stud is used as the impact bearing head when deep driving of earth electrode is required.

Mask Group 41.png
Coupler

Coupler is used to combine two or more earth rods.

Mask Group 42.png
 
SOLID COPPER EARTH ROD AND ACCESSORIES
Externally Threaded

Solid Copper Earth rods used in protective earthing of commercial and industrial buildings by dispersing the lightning flashes and fault currents of distribution to the earth.

Mask Group 43.png
Mask Group 44.png
  • Representative products tested for IEC 62561-2:2012

  • Grade of Copper used is ETP-Cu, having 99.9% purity.

  • Earth Rods available in Stainless Steel AISI 316 UL Listed.

  • Add “S” for SS earth rods (e.g. RESS / RISS).

Driving Stud

The driving stud is used as the impact bearing head when deep driving of earth electrode is required.

Mask Group 45.png
Coupler

Coupler is used to combine two or more earth rods.

Mask Group 46.png
Internally Threaded

Solid Copper Earth rods used in protective earthing of commercial and industrial buildings by dispersing the lightning flashes and fault currents of distribution to the earth.

Mask Group 47.png
Mask Group 48.png
  • Grade of Copper used is ETP-Cu, having 99.9% purity.

  • The Earth Rods can be supplied with tinplating of 1µm. The Tinplating is only for aesthetic reasons.

  • Earth Rods available in Stainless Steel AISI 316 UL Listed.

  • Add “S” for SS earth rods (e.g. RESS / RISS).

Driving Head

The driving stud is used as the impact bearing head when deep driving of earth electrode is required.

Mask Group 49.png
Coupling Dowell

Coupler dowell used to combine two or more earth rods.

Mask Group 50.png
Driving Tip

Driving tip is used as the bottom of the earth rod.

Mask Group 51.png